Plasma cutter could be a most demanding and expensive task in the fabrication industry and the list of best plasma cutters in the year 2024 is listed below along with all the other necessary details.
Best Plasma Cutters a detailed review
Cutting the metal is a no joke. Where it demands a skilful person, it also demands the best equipment to get clean and sharp cuts with less heat usage and more exactness with the aid of a plasma torch.
Plasma cutters are expensive but the growing industry has come up with the inverter technology that lowers the cost of a plasma cutter. The plasma cutter should be energy efficient to precisely cut through the metal just as needed.
For this article, we’ve come up with 9 top picks for plasma cutters in the market that does the work in the best possible way and also doesn’t cost ample. Also, after the plasma cutters listing, a brief buying guide is described along with the answers to some commonly asked questions so you can make a wise and confident decision.
Among all the top picks, the one that leads the game is Hypertherm Powermax45 XP Hand System which is everyone’s favourite for many good reasons. It provides 10 to 45 amps for precisely cutting a ⅝-inch thick plate of steel. It is professionally designed to be fit for the use at an industrial level too. Furthermore, it’s offering dual 240/480 volt power input along with a smart sensor that can automatically sense for adjusting compressed air settings. A sure amazing plasma cutter of the time!
Best Plasma Cutters
| Products | Features | Price |
| Hypertherm Powermax45 XP Hand System | Fast-Connect torch connection Drag-cut plasma cutting Torch disable switch | 2500$ |
| Miller Electric Spectrum 625 Plasma Cutter | XT-40 torch is comfortable Auto re-triggering Cuts 5/8-inch steel plate | 2000$ |
| Hobart 500566 Airforce 40i Plasma Cutter | Fast and clean cutting Onboard diagnostic system Fanworks on demand | 1800$ |
| Hobart – 500553 Handler 210 MVP MIG Welder | Easy switching between voltage Ease of setting up Flexible for a variety of projects | 1500$ |
| Hypertherm 088079 Powermax30 XP | Easy to set up and use Perfect and comfortable grip Dual 110V or 240V plasma cutter | 1200$ |
| Hypertherm 088079 Powermax30 XP | Less welding spatter High-precision arc performance Dual-processing capacity | 1000$ |
| Hobart 500559 Handler 140 MIG Welder | Built-in compressor 120-volt power Post-flow air cooling after cuts | 800$ |
| Hobart 500564 Airforce 12ci Plasma Cutter | Lightweight and portable Welder with a pulse and plasma cutter works from 110V and 220V | 600$ |
Hypertherm is a famous brand that makes and sells best and unique cutting technology with a high customer trust profile. Hypertherm is head over heels in making appliances for plasma cutting, laser cutting, and water jets. There is no wonder why the cutters by Hypertherm are highly appraised and always the top choice of reviewers because it solely focuses on quality and effectiveness.
Features:
Starting with the best plasma cutter by Hypertherm, the Powermax45 XP, it’s always worth spending every penny over the product. It comes in an ergonomic and compact size that is also lightweight so that users can handle this quite conveniently and it adds more to its portability too.
On the verge of the scale, it’s a 16mm cutting system that is highly efficient in providing quality and precise plasma cuts.
Our top pick for today, the Hypertherm Powermax45 XP is capable of producing 10 to 45 amps which are enough to provide high capacity for precisely cutting a ⅝-inch thick plate of steel. The cutter is professionally designed to be fit for the use at an industrial level too where heavy efficiency is required to get the work done.
Furthermore, it’s offering dual 240/480 volt power input along with a smart sensor that can automatically sense for compressed air settings to be applied.
Adding on, it also features a torch disabled switch which allows you to change the torch components. The quick-change technology of the cutter is providing a rapid reconfiguration in the torch style and the tip sizes to ensure the most accurate and precise error-free cuts at the metal plate.
The features that make it most appraised plasma cutter include precise cuts, smooth edges, and high rating of inches per minute figures, and only a user can figure out how important it is to have these astonishing features all together in a plasma cutter.
Verdict:
Hypertherm succeeded at providing the most efficient metal cutting through Powermax45 XP plasma cutter. This cutter has got a lot of impressive properties including lightweight, small size, max cut 5/8-inch stainless steel plate, 10 to 45 amps output, 110v 220v dual voltage as well as 3-year power supply warranty which are great to have in a plasma cutter.
Pros:
- Fast-Connect torch connection
- Drag-cut makes plasma cutting easy
- Torch disable switch for changing parts
- Smart Sense auto pressure setting
- Wide range of torch styles
Cons:
- No CPC port for computer control
Miller Electric Spectrum 625 Plasma Cutter
The Miller Spectrum 625 is undoubtedly another quality plasma machine this is why it has made a name in our list of the best plasma cutters. With high customer trust profile, it is loved for many good reasons that also includes dual 120/240 voltage input that is capable of providing enough of amps for sharpest and clearer cuts on the metal plate.
Features:
The Miller Spectrum 625 sets new bars in the market of fine and efficient plasma cutters for professional and industrial uses. It is expert at cutting metal sheets without any error.
This plasma cutter is providing dual power of 120 and 240 volts that is enough for providing an amazing output up to 40 amps along with a 60% duty cycle.
It cuts the stainless steel plates of up to 5/8-inch thickness very precisely and smoothly without leaving any rough or pointed edges.
The Miller Spectrum 625 is famous for many good reasons and one of them is its lightweight design at 21lbs that is highly convenient for portable uses over time. Also, the cutter has a carrying case as well as a shoulder strap to ensure the user will never have any problem during the usage.
Miller has furnished this Spectrum 625 with an automatic air pressure compensation system that smartly knows the adjustments of pressure in accordance with height and current setting. This is very helpful in optimizing the cutting performance while undergoing cutting and gouging.
Adding on, the cutter is equipped with a fully favourable, ergonomic, and slip-resistant design that also has a thumb guider as well as space for finger’s grip to minimize the fatigue caused by holding the cutter for long times.
The list doesn’t end here, it also comes with an auto-refire system that controls the pilot arc during the cutting procedure. It helps a lot by alternatively firing, turning off, and re-firing the torch which results in a more convenient and efficient use.
Verdict:
Miller has furnished the Spectrum 625 with everything a user would ever wish to have in an efficient plasma cutter. The Spectrum 625 is leading the race of the best plasma cutters for so many good reasons listed above. Owing to a Spectrum 625 for your professional or industrial use will never leave you in regrets.
Pros:
- Miller XT-40 torch is comfortable
- Comes with a storage case
- Auto re-triggering for cutting expanded metal
- Only weighs 21 pounds
- Cuts 5/8-inch steel plate
Cons:
- The storage box is hard to use
Hobart 500566 Airforce 40i Plasma Cutter
The most powerful and a quite expensive plasma cutter, Hobart Airforce 40i, is known for its great efficiency, quick cutting speed, heavy-duty cycle offering high amps, and wonderful reliability. It’s an ideal plasma cutter for the one who is in need of a light and non-industrial plasma cutter.
Features:
If Hobart Airforce 40i would be defined in one sentence, it would be “It is cutting prowess”. It cuts really fast with a maximum speed of 52inches/min on the steel plate of quarter-inch thickness.
Also, it can efficiently cut through the plates as thick as ¾ of an inch at a speed of 6in/min which is impressive. The cutter comes with a re-defined torch which is more responsive than previous models and is quite easy to handle.
The redesigned torch ensures the finest cuts with narrow kerf. It is basically an inverter-based cutter which helps in keeping the cutter lightweight and convincingly portable.
There are many other features that make it reliable and one of them is, a pilot arc startup with the auto-refire technology to help you in precise and convenient cuttings.
The cutter has its own board diagnostic system that would tell you about any major happening inside the unit. The onboard fan activates only when required to save more power to you.
There is no chance of any miss-happenings or errors in the unit as it is one among most appraised and holds the best place in the list of best plasma cutters, but if still something unusual happens, the Hobart backs its Airforce 40i plasma cutter with the gold standard Hobart’s proprietary 5/3/1 warranty that covers pretty much everything related to the unit.
Another most amazing thing about this cutter is, it is the most simplest-to-use and just ready out-of-the-box plasma cutter especially favourable for beginners.
Verdict:
Above mentioned features are more than enough to give you an idea about how conveniently favourable this plasma cutter is for the beginner and non-industrial use. Although, everything surely possesses little odds and this Airforce 40i lacks the convenience with ground clamps only as they don’t have sufficient grip. Other than this, it undoubtedly a great plasma cutter for sure.
Pros:
- Fast and clean cutting
- Onboard diagnostic system
- Fanworks on demand
- Thermal overload protection
- Surprisingly light and mobile
Cons:
- Ground clamp is weak
- Shorter power cord
Hobart – 500553 Handler 210 MVP MIG Welder
The Hobart Handler 210 MVP MIG is another classical plasma cutter that comes up to the reputation of its world-class manufacturer. This plasma cutter is capable of running at an impressive 210A power within its compact size. It’s a big power packed in a compact size. The high-trust, power, and reliability make this one of the most convenient plasma cutters in the market.
Features:
Hobart Handler 210 MVP MIG may look less-efficient but is highly powerful and is a superior-level cutter for your plasma shop or the garage. It’s a bit heavy with 79lbs weight but it surely worth it.
It’s a highly versatile welder that surely provides neat and fine welds. This welder offers 7 voltage settings for precise welding to add more convenience for any kind of use in the field.
The Hobart Handler 210 MVP MIG is one among those welders that provide most convenient usability that comes as a ready-to-use unit and can weld 24 gauge materials having a thickness of 3/8 inches in just one pass.
This welder is offering a lot for the price and for the features as it can be used for many applications during any kind of projects including construction, household, repairing shop, garage, and much more.
Other impressive features of this welder include the dual voltage of 115V/230V, an MVP plug for easy finding of plug locations, and a quick change system that doesn’t require any tools.
Adding on, it is offering a duty cycle of 20% at 90 amps for the 115 voltage as well as 30% at 150 amps for the 230 voltage. Other than this, the welder is also equipped with dual gauge regulator, gas hose, built-in gas solenoid, 10 feet H10054 -10 gun with ergonomic handle, spool hub assembly, self-shielding o.8mm wire, and 3-meter power cord.
The welder is efficient enough with its Drive system that is made of cast aluminum and also, it provides enough of motor and thermal overload protection for the safeguard of the user.
Verdict:
The Hobart Handler 210 MVP MIG is probably the most efficient welder one could ever own. It efficiently helps in managing the maximum arc performance with its infinite wire feed control system that provides complete control over speeds for relatively less spatter. A great deal for so many goods!
Pros:
- Easy switching between voltage
- Ease of setting up
- Flexible for a variety of projects
- Easy to Use
- Comes with a Lengthy Warranty
Cons:
- Heavy to move around
- Not for industrial use
Hypertherm 088079 Powermax30 XP
Hypertherm is a well-known brand that is launching best and unique cutting technologies with a high customer trust profile. Hypertherm is excitingly successful in making appliances for plasma cutting, laser cutting, and water jets. There is no wonder why the cutters by Hypertherm are highly appraised and the reason is, it solely focuses on quality and effectiveness.
Features:
The Powermax30 XP comes in an ergonomic and compact size that is also lightweight at 42.3 pounds so that users can handle this quite conveniently and it adds more to its portability too.
On the verge of the scale, it is gluten-free and locally sourced cutting system that is highly efficient in providing quality and precise plasma cuts.
The Hypertherm Powermax30 XP is capable of producing enough amps to provide high capacity for precisely cutting a ⅝-inch thick plate of steel. The cutter is professionally designed to be fit for the home grade and general use around.
Furthermore, it’s offering dual 110/240 volt power input along with a smart sensor that can automatically sense for compressed air settings to be adjusted accordingly.
Adding on, it also features a Duramax LT torch made with high-quality material that can offer high resistance for heat and impact.
The quick-change technology of the cutter is providing a rapid reconfiguration in the torch style and the tip sizes to ensure the most accurate and precise error-free cuts at the metal plate.
The features that make it most appraised plasma cutter include precise cuts, smooth edges, and high rating of inches per minute figures, and only a user can figure out how important it is to have these astonishing features all together in a plasma cutter.
Verdict:
Hypertherm succeeds at providing the most efficient metal cutting through Powermax30 XP plasma cutter. This cutter has got a lot of impressive properties including lightweight, small size, max cut 5/8-inch stainless steel plate, 110v 240v dual voltage along with a healthy power supply warranty which is all great to have in a plasma cutter.
Pros:
- Impressive cutting results
- Easy to set up and use
- Perfect and comfortable grip
- Dual 110V or 240V plasma cutter
- Storage case included
Cons:
- Home grade plasma cutter
Hobart 500559 Handler 140 MIG Welder
The Hobart is among the most well-established names in the professional and amateur welder’s market. Hobart is always in the front line of providing quality welders or plasma cutters at a relatively good price that is affordable. The apparent qualities of Handler 140 are exceptional quality and excellent workmanship that is very suitable for DIYs and household needs.
Features:
The Handler 140 by Hobart is capable of running at a standard 110 volts power source and is rightly sized for handsome portability at 57 pounds weight. It delivers a favourable right power of 140A for the household and general work.
The welder is capable enough of providing 20% duty cycle at 90 amps which is more than enough for day to day general tasks.
Handler 140 can easily weld thin sheets or materials of stainless steel, steel, and aluminum whereas, for the thicker plates, the extra flux-core option can be utilized. It can weld 24 gauge materials having a thickness of 1/4 inches in just one pass.
This welder comes with built-in wire feeding system as well as rolling levers for rapid release to cut down the human work. Adding on, it also features premium safety that electrically cools down the wires when not in use.
Furthermore, it features 4 voltage outputs and a wire feed tracking system to keep an eye on the thickness and material quicker adjustments accordingly.
With Handler 140, you can now have good access to the polarity changeovers with spare-tip that accommodates storage holes. Adding on, there are dual grooves in drive rolls for simplifying the switching between different sized wires.
It provides enough of motor and thermal overload protection as well as short circuit protection for the safeguard of the user.
Verdict:
The Handler 140 by Hobart is convincingly affordable and cost-effective for the amazing features it is offering. It undoubtedly is a good investment and you get more than what you pay for. Also, the unit is backed by a hard-to-beat Hobart 5/3/1 super-duper industrial-quality warranty which makes it a good pick for the list of best plasma cutters.
Pros:
- Great for beginners
- Great arc performance
- Lasting wire feeding performance
- Low weight and portable
- Convenient polarity changing-over capacity
- Less welding spatter
- High-precision arc performance
- Wire feed-out is always accurate
- Dual-processing capacity
Cons:
- Only 110-volts power usage
- Not necessarily for big jobs
Hobart 500564 Airforce 12ci Plasma Cutter
The Hobart is among the most well-established names in the professional and amateur welder’s market. Another highly powerful plasma cutter, Hobart Airforce 12ci, is known for its great efficiency, quick cutting speed, heavy-duty cycle offering high amps, and wonderful reliability. It’s an ideal plasma cutter for the one who is in need of a light and professional plasma cutter.
Features:
The Hobart Airforce 12ci is conveniently lightweight and hence, portable that offers professional-grade features and premium-quality for the price. It’s highly efficient for households and workshop crafts as well as for professionals that need a precise and portable plasma cutter.
Hobart is always the best value and this Airforce 12ci is capable of operating at 120 volts with the ease of use anywhere. It comes equipped with an onboard air compressor that resolves the complexity of operation for you.
Adding on, the Post-flow air control of the cutter flows cool air over the cut right after cutting to add convenience to the processing.
Hobart also furnishes Airforce 12ci with a Fan-On-Demand feature to save more power by minimizing the excessive and unnecessary use of the fan. Cuts are also convenient for the beginners with the pilot arc starting technology.
The rated output of this Airforce 12ci is 35% duty cycle with 12 amps at 110VDC and a maximum of ¼ inch cutting capability.
The torch design is also quite convenient and ergonomic to add more ease of keeping it properly aligned at the cutting angle to minimize the risk of errors as well as the operator’s fatigue.
It cuts really fast with maximum speed on the steel plate of 3/16-inches thickness. The cutter comes with a re-defined torch which is more responsive than previous models and is quite easy to handle.
The 12-foot torch lead ensures the finest cuts with narrow kerf. There are many other features that make it reliable and one of them is, a pilot arc startup with the auto-refire technology to help you in precise and convenient cuttings.
Another most amazing thing about this cutter is, it is the most simplest-to-use and just ready out-of-the-box plasma cutter especially favourable for beginners.
Verdict:
Above mentioned features are more than enough to give you an idea about how conveniently favourable this plasma cutter is for the beginner and non-industrial use. Although, everything surely possesses little odds and this Airforce 12ci counts for some complaints of low pressure. Other than this, it undoubtedly a great plasma cutter to be included in the list of best plasma cutters.
Pros:
- Built-in compressor
- 120-volt power
- Easy arc start
- Post-flow air cooling after cuts
- Ergonomic torch design
Cons:
- Some complaints of low pressure
2019 Everlast PowerPro 40a Plasma Cutter
Everlast is another highly-trusted brand in the market of plasma cutters that keeps on updating its products for the sake of improvement and more added goodness. The Everlast PowerPro 40a is an upgraded model that features Blow Back pilot arc starting for easier and convenient starts on any material.
Features:
The Everlast PowerPro 40a is offering a compact design that is easy to handle and can be transported to any place for more convenient usage with the weight 60 pounds.
The Everlast PowerPro 40a is smart and efficient as it can offer TIG and stick welding as well as descriptive plasma cutting features so you can fulfil all your related needs from one machine.
The PowerPro 40a comes equipped with easy-to-use controls along with the simplest selection switch for changing over during the process that makes it more convenient to use even for beginners.
Adding on, the torches are also easy to change from welder torch back to plasma torch so you can use it without any difficulties and the risk of miss-handling that can directly affect the precision and quality of cutting.
Another good thing about PowerPro 40a is, it’s an inverted design that makes it low power consuming design and also reduces its weight.
Furthermore, PowerPro 40a is highly capable as it offers a high duty cycle at rated amps for any kind of material and working need including TIG, stick, and plasma.
It also keeps you at the safe side always by featuring ok to cut indicator lights and an overcurrent indicator that let you know about exceeded duty cycle.
It surely cuts clean and smooth and welds on almost any metal, increasing its reliability.
Verdict:
The Everlast PowerPro 40a surely has some great features that have made it into the list of best plasma cutters for the year 2020. This cutter is an AC and Dc welder along with the pulse and plasma cutter properties that make it versatile and appealing for the users. It comes with all the safety and efficiency features that a user can demand.
Pros:
- Lightweight and portable
- Welder with a pulse and plasma cutter
- works from 110V and 220V
- IGBT Infineon modules
- Inverter technology
Cons:
- Requires “clean power” generator
The AHP AlphaTIG 200X is a smart welder and cutter manufactured and sold by AHP welding systems which is a renowned company for making high-quality welding and plasma cutting machines. The 2018 AHP AlphaTIG 200X is upgraded with 200Hz pulse frequency and AC frequency. It makes sure to deliver efficient welding torch for greater reliability of the users.
Features:
The AHP AlphaTIG 200X is equipped with inverter technology that works in collaboration with PWM (pulse width modulation) and IGBT (insulated gate bipolar transistor) for most precise, accurate, and fine operations.
The AlphaTIG 200x is a high-quality and efficient welding machine which has the capability to operate in TIG as well as stick welding modes for user’s reliance. Adding on, it can operate on dual voltages either 110Volt or 220Volt, and also, depending upon the need, you can choose between AC or DC output.
This welder allows usage in both DC and AC modes while providing a good range of frequency controls which make it way more reliable than others.
It can work with ¼ inches aluminum and 3/8 inches plate of mid steel which covers most of the working needs. Providing a duty cycle of 60% at 200 amps for TIG welding, it always offers more power than needed.
The welder is also offering pre and post flow controls as well as start and end cycles which are programmable according to the needs. Also, users are provided with 2T/4T sequencer function that can be switched easily using a remote control. 2T is best suitable for the beginners whereas the 4T operational mode is for experienced skilful users.
Now you can easily control the heat of the unit with the help of the fully adjustable pulse feature that works by adjusting pulse frequency, low and high amps stages, and base and peak welding amps. You have full control over every feature of the unit.
The manufacturer has backed its AlphaTIG 200X with a handsome 3 years warranty that covers pretty much everything about the machine.
Verdict:
The AHP AlphaTIG 200X is smart and undoubtedly convenient to make a mark in our today’s article for top best plasma cutters. It can make welding quite easy even in un-favourable environmental conditions with the aid of its versatility in power. All other features also lean it towards a highly capable welder as well as plasma cutter that can be used by both beginners and experienced persons.
Pros:
- AC/DC output power type
- 2T/4T functionality
- Start and end amps adjustment in the 4T mode
- High-Frequency TIG start
- The pulse frequency of 0.5 to 200Hz
- Anti-stick control
Cons:
- No wire-feed MIG welding
- The instruction manual is short
Buying Guide for Plasma Cutter
A plasma cutter is designed to cut the metal sheets with smooth edges and precise cuts. It significantly improves user’s fabrication capability if the user tends to choose a fine a rightly-designed plasma cutter otherwise a cheap or low-quality plasma cutter can make things really messy.
One can choose the features of a plasma cutter depending upon its own needs and can go for either industrial or professional and household usage plasma cutter.
Despite the fact of the usage of the plasma cutter, here are some general features or qualities that you should look forward in a plasma cutter in order to make the right decision.
Area of usage: The main deciding factor for a plasma cutter is probably it’s an area of sue that would decide the needed features. For example, if cutting a simple sheet of metal is required, you won’t need any highly powerful 200amp plasma cutter which is used to cut 3/4-inches steel plate.
Also, for plenty of light-duty chores, an average size machine would cost quite less and would run on 120-volt power for additional savings to provide a convenient usage.
Required Power Levels: Different tasks require different output power as well as different duty cycles. The need would define which input you need at minimum level whether 120V or 240V to get the work done.
Here, dual voltage plasma cutters can give you a free hand of working with both of the inputs at times so going for a dual voltage plasma cutter always comes handy.
Air Pressure Source:
Some plasma cutters or welders come with a built-in air compressor feature whereas many others require air from an external air compressor. The point to keep in mind is, the onboard or built-in air compressor adds up more cost whereas purchasing a separate air compressor that can double as a source of power for spraying guns or other air tools.
Choose wisely what you want!
Advanced Features:
There’s always a basic set-up for any machine and a premium-level luxurious set-up for more added convenience but at the expense of extra dollars. In the case of plasma cutters, there are some advance features added to some of them for extra convenience and reliability of use. Some of the advanced features are listed as followings:
- Different Arc Starting Types: Some cutters start-up without touching, some by dragging the torch and others offer a scratch start. No-touch arc starting can be a little tough to handle as it may cause interference with digital equipment.
- Computer Numerical Control: Having this, you can control the whole working by your computer and requires an ergonomically designed table that will move the torch on the grid system.
- Air Flow Adjustment: Where most plasma cutters are offering automatically adjusted airflow, some plasma cutters also give you control over the amount of airflow as well as the time of flowing that will cool down the metal after the process.
- Special Automatic Settings: Some cutters are capable of changing the air pressure and electrical current settings accordingly whereas some offer factory presets where you can only select the material along with its thickness to start the process.
- Automatic Torch Re-Strike: With this, you can cut across the gaps present in the metal surface quite conveniently. The gaps, holes or other cutouts are smartly sensed by the built-in sensor that shuts off the torch while crossing the gaps and then re-strike when senses the metal surface.
AC/DC output power type: Before deciding on a plasma cutter, make sure to check its versatility in the matter of inputs. Along with the voltage input, another factor to consider is, if it can work with both AC and Dc currents or with only one of them.
It’s always more convenient to go for a plasma cutter that can work on both inputs for the ease of the users.
2T/4T functionality: Some plasma cutters are designed exceptionally for professional use, some are favourable for the industrial use and others may efficiently help you in general and household chores.
The choice depends on the Area of use but still, having something extra is always better to stay away from the restricted work.
It’s always convenient to have a plasma cutter that can be switched at 2T functionality for the beginners and at 4T functionality for the experts.
Warranty Checkout:
Warranty periods are a safe line if you get in trouble with your plasma cutter. It varies a lot depending upon the manufacturer, from a few months to several years.
Some brands are providing nationwide dealership networks whereas others may offer a very restricted warranty.
Talk openly about the warranty before making a decision and check for factors like covering up the cost of shipping and sending the despair machine back to its manufacturer and factors a warranty is apparently covering.
Answers To Some Commonly Asked Question:
In case you still have some confusion left, there are answers to some commonly asked questions about plasma cutter for the best possible convenience of the reader.
What is the best plasma cutter for the money?
The market is genuinely floored by the best of the best options for the most efficient and different types of plasma cutters. Some are basic units at the low prices, some are quite expensive whereas some others are cost-effective and provide the best services at the best possible rates.
The best plasma cutter for the money, in our list of best plasma cutters, is undoubtedly Hypertherm Powermax45 XP Hand System which is everyone’s favourite for many good reasons.
It provides 10 to 45 amps for precisely cutting a ⅝-inch thick plate of steel.
It is professionally designed to be fit for the use at an industrial level too. Furthermore, it’s offering dual 240/480 volt power input along with a smart sensor that can automatically sense for adjusting compressed air settings. A sure amazing plasma cutter of the time!
Other than this, there are many feasible options included in the list which are all top-picks for different reasons.
What is a good inexpensive plasma cutter?
A good inexpensive cutter would be the one serving with-in a balance between cheap and outstanding quality without compromising on the efficiency of the work.
Even if it doesn’t possess premium and extra expensive features, it should possess all the efficient features necessary for sharp, clear and fine cuts rendering smooth edges.
In our list of best plasma cutters, the one that seems to be most inexpensive yet good enough to get the work done is 2018 AHP AlphaTIG 200X Welder which is smart and undoubtedly convenient to make a mark in our today’s article for top best plasma cutters.
It can make welding quite easy even in un-favourable environmental conditions with the aid of its versatility in power. All of its other features make it a highly capable welder as well as a plasma cutter that can be used by both beginners and experienced persons with convenience.
What is the best plasma cutter under $500?
This article concludes all the top picks and the best options for a plasma cutter that are leading the market nowadays. All of them are highly genuine at providing quality services with all the goods to their users.
For the best plasma cutters under $500, please mind visiting the other article of us that includes a list of top picks for the efficient plasma cutters that come in a budget as low as $500.
Are cheap plasma cutters any good?
There is no straight and clear answer to this question as we know, not every expensive product is a good one and same way, not every cheap product is a waste of money.
Sometimes, even cheap products are really good at providing general or basic services with quality. This is why it’s never been a confirm wastage spending over cheaper products.
The thing that matters is, do proper research and read some articles or customer’s reviews so you can choose wisely and knowingly.